Knowledgebase
(9)General Networking (79)WinGate Lumen for WinGate (2)Kaspersky AntiVirus for WinGate (2)PureSight for WinGate (8)WinGate VPN
SEARCH
Knowledgebase
Opening a Hole in the WinGate Firewall
Posted by Adrien de Croy (Import) on 13 July 2006 07:46 AM
You can open a port in the WinGate firewall through the Extended Networking menu (GateKeeper--System tab).

Port Security in Extended Networking.

Select the Port Security menu and click ADD to create a new port opening.
Choose INTERNET COMPUTERS TO THE WINGATE PC
Enter the port range (1503 to 1503)
Choose whether you need TCP/UDP or both
Choose ACTION--ALLOW PACKET
Please note, if you need to map this port to a machine behind the WinGate server, choose REDIRECT PACKET TO IP ADDRESS and enter the IP address of the machine you are redirecting to. If you have problems with the connection try checking the box DON\'T TRANSLATE SOURCE IP.
Click OK, you should now see the new port opening in the list with Action ALLOW or REDIRECT.

Adding a Port
(1031 vote(s))
Helpful
Not helpful
Comments (0)